Water meter running with everything off: what it means

If your water meter keeps moving when every fixture and appliance is off, water is leaking somewhere after the meter. Close your home’s main shutoff to learn whether the leak is inside the house or in the buried line between the meter and the house.
How to do the meter test
- Make sure no one is using water. Turn off the dishwasher, washer, ice maker, irrigation timer and all faucets.
- Find your water meter, usually in a ground-level box near the street or property line. Lift the lid carefully and look for insects or animals first.
- Look for the leak indicator (a small triangle, star or dial that spins) and write down the meter reading.
- Wait 30 minutes without using any water.
- Check the meter again. A spinning indicator or a changed reading means water is going somewhere.
Is the leak inside or outside?
- Find your home’s main shutoff valve (often where the line enters the house or at the water heater area).
- Close it fully.
- Go back to the meter and watch the indicator for a few minutes.
- If the meter stops, the leak is inside the home (fixtures, walls or under the slab).
- If the meter keeps moving, the leak is in the line between the meter and the house.
Things that can make a meter move that are not leaks
- An ice maker or water softener refilling
- An irrigation timer or drip line starting
- A toilet cycling on and off (this is a leak, but a small, fixable one)
- A neighbor’s hose bib tied into your line (rare, but check)
What a moving meter usually means
Indoors, the usual suspects are toilets, faucets and supply lines. If you have checked those and the meter still moves, the leak may be in a wall or under the slab. Outdoors, look for wet spots, sunken soil or a section of yard that stays green. Our guides on finding a leak under concrete and main water line leaks explain next steps.
When to call
If the meter moves after the toilet check and shutoff test, schedule detection so the leak can be located without tearing up floors or digging the yard. We offer slab leak detection and water line leak detection in Greer and nearby communities.
Related help
- High Water Bill in Greer, SC? How to Tell If It’s a Leak
- Main Water Line Leak in Greer
- Emergency slab leak checklist
- Water line leak detection
Frequently asked questions
Why is my water meter running when no water is on?
Most of the time it means a leak somewhere after the meter, such as a toilet, a supply line, a slab leak or the buried line from the meter to the house.
How long should I wait for the meter test?
About 30 minutes without using any water gives a clear reading on most meters.
Does a spinning leak indicator always mean a big leak?
No. Even a slow leak can turn the indicator. The size matters less than whether it is steady.
Should I turn off the main valve if the meter keeps moving?
Closing the main valve limits damage while you arrange detection and repair.