Thermal imaging leak detection in Greer, SC for hot-water slab leaks and hidden moisture
Thermal imaging leak detection uses an infrared camera to see temperature differences on floors and walls. A leaking hot-water line warms the concrete above it, so the camera shows a heat pattern that follows the pipe and narrows where the leak is.

What is thermal imaging leak detection?
Infrared cameras do not see through concrete. They read surface temperature. A hot-water leak warms the slab and flooring above it, and that warmth appears as a bright pattern on the camera, helping us trace the pipe route and shrink the search area.
Thermal imaging also reveals moisture in walls and ceilings, because wet material holds a different temperature than dry material. We always confirm with moisture meters and acoustic tools before marking a final location.
Signs you may need thermal imaging leak detection
- Warm patches on the floor, especially in bare feet
- Hot water takes longer to arrive or runs out quickly
- Higher gas or electric bills from the water heater
- Damp drywall, stained paint or peeling baseboards
- Musty smell with no visible source
Our thermal imaging leak detection process
- Interview about symptoms and plumbing layout
- Scan floors and walls with an infrared camera
- Map temperature patterns along likely pipe routes
- Confirm with moisture meter readings
- Verify with acoustic listening tools
- Mark the leak and save thermal images
- Review findings and repair options with you
Equipment and methods
- Infrared camera
- Shows heat patterns on floors and walls.
- Moisture meter
- Verifies hidden moisture in materials.
- Acoustic tools
- Confirm the exact leak position.
When to choose this service
Choose thermal imaging when you suspect a hot-water slab leak, have warm floor areas, or need a documented moisture map for an insurance claim. Cold-water leaks rely more on acoustic and pressure methods.
Cost and timing
Thermal imaging is usually included as part of a full inspection rather than priced as a separate stand-alone item. Ask us for a combined quote. See the slab leak cost guide.
Thermal Imaging Leak Detection in Greer and the Upstate
Many Greer homes have water heaters in garages or closets with hot-water lines running through the slab to the kitchen and bathrooms. Those long hot-water runs are among the most common places for thermal imaging to help.
Thermal Imaging Leak Detection FAQs
Can thermal imaging find every leak?
It works best on hot-water lines and leaks that change surface temperature. We combine it with acoustic and pressure testing for cold-water leaks.
Can the camera see through concrete?
No. It reads surface temperature, which the leaking hot-water line changes.
Is thermal imaging useful for insurance?
Yes. Images and a written report document the problem for your claim.
What are signs of a hot-water slab leak?
Warm floor spots, long waits for hot water, a water heater that runs constantly and higher energy bills.